Om veiligheidsredenen wordt u na 4 minuten uitgelogd
Spoed
bestelling Bekijk
mijn offerte
Winkelmandje 0
0
Onmogelijk toe te voegen. Uw mandje bevat een vergrendelde offerte en moet worden voltooid voordat u andere items kunt bestellen. Toevoegen aan het winkelmandje... Artikel tegevoegd aan het winkelmandje
Equipment Sterilization Indicators for autoclaves

Indicators for autoclaves

H2O2 indicator strip

Ontdekken
• For monitoring hydrogen peroxide sterilisation processes (using 2.3 mg/l vH2O2 at 50 °C for 6 minutes)
• Free of lead and toxic heavy metals
• Indicator changes from brown to green
• Dimensions 19 x 70 mm

Excelsior dry heat indicators

Ontdekken
For dry heat sterilisation control.

Autoclave tape

Ontdekken
• 4 Self-adhesive
• Roll 19 mm x 50 m
• For steam sterilization between 121 and 134 °C
• The tape changes colour when sterilization is complete

Indicator tape for sterilisation

Ontdekken
Adhesive indicator tape to put on items before sterilisation. Temperature sensitive ink gradually changes colour when the desired temperature has been reached. 3 models of indicator tape are available: for the autoclave (damp heat), any type of dry heat sterilisation and gas (ethylene oxide). Dispensers 086000 and 140265 are suitable for use with the tape.

Adhesive tape for autoclave

Ontdekken
Adhesive tape for the sealing of containers or packaging of products intended for autoclave. Do not have a sterilisation indicator.

Sterilization and wash indicators

Ontdekken
• Non-sequential integrator
• Declination according to autoclave cycles:
- TST SKC short cycle: 121 °C/15 min

- TST 3702 standard cycle: 125 °C/20 min

Pack Bowie-Dick Browne

Ontdekken
Bowie-Dick type ready to use test packet for steam sterilisers. Indicator to be used in specific tests as defined in EN 867-1 Class B 867-4 and in the norm ISO 11140 Class 2.

Instructions: Place the test at the centre of the top shelf and carry out a BD cycle. Open the package and check sheet: the successful test is blue, another colour indicates failure.

Test Bowie and Dick VISA

Ontdekken
For the daily steam penetration test. The test sheet is placed in a ''sandwich'' within 2 laminated layers, reproducing the strain of steam penetration in accordance with EN 867-4. The removal of the paper packaging improves the constraints linked to waste disposal.

Emulator Prion 134-18 NS

Ontdekken
The emulator Prion 134-18 NS is a class 6 multi-parameter indicator (temperature, time and saturated steam). It is used during steam sterilisation, cycle Prion 134 °C / 18 minutes.

Excelior sterilisation indicator

Ontdekken
For steam sterilisation control

Steripoint sterilisation indicator

Ontdekken
• High accuracy in the shift time
• Constant reproducibility
• Quality commitment due to the numerous controls of shift times during production
• The shift of Steripoint® is inhibited by the presence of a steam / air or gas mixture, or when one of the parameters of the cycle is insufficient
• The shift from purple to green ink indicates compliance of time, temperature and steam conditions during sterilisation cycles

Bio indicator STERIKON

Ontdekken
• 2 ml ampoule of Geobacillus stearothermophilus ATCC 7953 spores
• Spore completely destroyed after autoclaving (121 °C / 15 min)
• After incubation:
if yellow/orange bulb: poor autoclaving
if red/purple bulb: correct autoclaving

GST sterilisation indicator

Ontdekken
• Ampoule 4 ml
• Spore bacillus Geobacillus stearothermophilus
• For sterilisation control (121 °C / 20 minutes)
• Easy to use
• After autoclaving, the ampoule is placed in an incubator at 55 - 60 °C for 24 - 48 hours
• If colour change compared to a control: sterilisation did not work